Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels
Pereloma, E. V., Timokhina, Ilana and Hodgson, Peter 2001, Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels, Ironmaking and steelmaking, vol. 28, no. 2, pp. 198-202.
(Some files may be inaccessible until you login with your DRO credentials)
Comparison of the microstructures formed in the specimens produced by corresponding schedules in the dilatometer and by laboratory rolling has shown that a higher level of retained austenite was achieved in dilatometer specimens, whereas in rolled specimens a higher amount of martensite was present instead of retained austenite.
Reproduced with the specific permission of the copyright owner.
Field of Research
091399 Mechanical Engineering not elsewhere classified
Unless expressly stated otherwise, the copyright for items in DRO is owned by the author, with all rights reserved.
Every reasonable effort has been made to ensure that permission has been obtained for items included in DRO.
If you believe that your rights have been infringed by this repository, please contact email@example.com.