Carbon fibre surfaces with grafted functional groups and sizings and its interaction with different matrices
conference contribution
posted on 2017-01-01, 00:00 authored by E Wölfel, Luke HendersonLuke Henderson, C Scheffler© 2017 International Committee on Composite Materials. All rights reserved. The aim of this research is to investigate the influence of different fibre surface modifications on the adhesion between carbon fibre and thermoplastic or thermoset matrices following different approaches. Carbonized, additionally oxidized and extra amino functionalized as well as epoxy sized and plasma modified single fibres were embedded into epoxy resin, polyamide 66 (PA66), polybutylene terephthalate (PBT), and maleic anhydride grafted polypropylene. Single fibre composites were produced in order to characterize the adhesion strength by the single fibre pull-out test. The failure behavior was investigated using scanning electron microscopy. The results show that the adhesion between fibre and matrix could be improved due to the installed amino groups in PA 66, the removal of the epoxy sizing, and applied oxygen containing groups in maleic anhydride modified PP. In the case of carbon fibre the epoxy sizing is supposed to seal the different functional groups on the fibre surface, however, an improved fibre-matrix adhesion in epoxy and PBT matrix was found.
History
Pagination
1-6Location
Xi'an, ChinaStart date
2017-08-20End date
2017-08-25Language
engPublication classification
E1 Full written paper - refereedTitle of proceedings
ICCM 21 : Proceedings of the 2017 International Conferences on Composite MaterialsEvent
Composite Materials. Conference (2017 : 21st : Xi'an, China)Publisher
[The Conference]Place of publication
[Xi'an, China]Usage metrics
Categories
Keywords
Licence
Exports
RefWorksRefWorks
BibTeXBibTeX
Ref. managerRef. manager
EndnoteEndnote
DataCiteDataCite
NLMNLM
DCDC