Experimental investigation of the influence of fabrication conditions on dynamic viscoelastic properties of PC-ABS processed parts by FDM process
Version 2 2024-06-18, 15:21Version 2 2024-06-18, 15:21
Version 1 2019-06-26, 16:37Version 1 2019-06-26, 16:37
conference contribution
posted on 2024-06-18, 15:21 authored by OA Mohamed, SH Masood, JL Bhowmik© Published under licence by IOP Publishing Ltd. This paper presents optimization studies on manufacturing parameters for fused deposition modelling (FDM). Layer thickness, air gap, raster angle, build orientation, road width and number of contours are the process variables considered for optimization. Dynamic modulus and glass transition temperature were considered as response parameters. Experiments were designed using fractional factorial design. The effect of each process parameter was investigated using developed regression models and through analysis of variance (ANOVA) technique. The surface characteristics are studied using scanning electron microscope (SEM). Further, performance of optimum conditions was determined and validated by confirmation experiment.
History
Volume
149Location
Bangalore, IndiaPublisher DOI
Open access
- Yes
Start date
2016-07-14End date
2016-07-16ISSN
1757-8981eISSN
1757-899XLanguage
engPublication classification
E1.1 Full written paper - refereedCopyright notice
2016, IOPTitle of proceedings
IConAMMA-2016 : Proceedings of the International Conference on Advances in Materials and Manufacturing ApplicationsEvent
Advances in Materials and Manufacturing Applications. International Conference (2016 : Bangalore, India)Issue
1Publisher
IOP PublishingPlace of publication
Bristol, Eng.Series
IOP Conference Series: Materials Science and EngineeringUsage metrics
Categories
No categories selectedLicence
Exports
RefWorksRefWorks
BibTeXBibTeX
Ref. managerRef. manager
EndnoteEndnote
DataCiteDataCite
NLMNLM
DCDC