File(s) under permanent embargo
Do accelerometers mounted on the back provide a good estimate of impact loads in jumping and landing tasks?
journal contributionposted on 2016-01-01, 00:00 authored by Chantal Simons, Liz BradshawLiz Bradshaw
Artistic gymnasts are frequently exposed to both low- and high-magnitude loads through impacts with the apparatus. These impact loads are thought to be associated with the high injury rates observed in gymnastics. Due to the variable apparatus and surfaces in gymnastics, impact loads during training are difficult to quantify. This study aimed to use triaxial accelerometers mounted on the back to assess impact loading during jumping and landing tasks. Twelve participants were fitted with an accelerometer on their upper and lower back, before performing a continuous hopping task, as well as drop landings and rebound jumps from various heights (37.5, 57.5, and 77.5 cm) onto a force platform. Peak resultant acceleration (PRA) was low-pass filtered with four cut-off frequencies (8, 15, 20, and 50 Hz). Filtering of PRA with the 20 Hz cut-off frequency showed the highest correlations between ground reaction force (GRF) and PRA. PRA recorded at the upper back, filtered with a 20 Hz cut-off frequency, appears to provide a good estimate of impact loading for continuous hopping and rebound jumps, but less so for drop landings since correlations between GRF and PRA were only significant when landing from 57.5 cm.
Pagination76 - 88
PublisherTaylor & Francis
Publication classificationC1 Refereed article in a scholarly journal
Copyright notice2016, Taylor & Francis
Biomechanicsaccelerationfilterground reaction forcesportAccelerometryAdultBackBiomechanical PhenomenaFemaleGymnasticsHumansPlyometric ExerciseWeight-BearingYoung AdultScience & TechnologyTechnologyLife Sciences & BiomedicineEngineering, BiomedicalSport SciencesEngineeringSHOCKBODYCHILDRENGYMNASTSDEMANDSFORCEMechanical Engineering