Deakin University
Browse

File(s) under permanent embargo

Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation

Version 2 2024-06-13, 10:36
Version 1 2019-05-20, 15:51
journal contribution
posted on 2024-06-13, 10:36 authored by ZP Xiong, AG Kostryzhev, NE Stanford, EV Pereloma
The strip casting is a recently appeared technology with a potential to significantly reduce energy consumption in steel production, compared to hot rolling and cold rolling. However, the quantitative dependences of the steel microstructure and mechanical properties on strip casting parameters are unknown and require investigation. In the present work we studied the effects of strain and interrupted cooling temperature on microstructure and mechanical properties in conventional dual phase steel (0.08C-0.81Si-1.47Mn-0.03Al wt%). The strip casting process was simulated using a Gleeble 3500 thermo-mechanical simulator. The steel microstructures were studied using optical, scanning and transmission electron microscopy. Mechanical properties were measured using microhardness and tensile testing. Microstructures consisting of 40-80% polygonal ferrite with remaining martensite, bainite and very small amount of Widmanstätten ferrite were produced. Deformation to 0.17-0.46 strain at 1050. °C refined the prior austenite grain size via static recrystallisation, which led to the acceleration of ferrite formation and the ferrite grain refinement. The yield stress and ultimate tensile strength increased with a decrease in ferrite fraction, while the total elongation decreased. The improvement of mechanical properties via deformation was ascribed to dislocation strengthening and grain boundary strengthening.

History

Journal

Materials science and engineering: A

Volume

651

Pagination

291-305

Location

Amsterdam, The Netherlands

ISSN

0921-5093

Language

eng

Publication classification

C1 Refereed article in a scholarly journal

Copyright notice

2015, Elsevier B.V.

Publisher

Elsevier