mahmud-electrothermalmodeling-2021.pdf (3.88 MB)
Electrothermal modeling and analysis of polypyrrole-coated wearable e-textiles
journal contribution
posted on 2021-02-01, 00:00 authored by Akif KaynakAkif Kaynak, Ali ZolfagharianAli Zolfagharian, T Featherby, M Bodaghi, M A Parvez Mahmud, Abbas KouzaniAbbas KouzaniThe inhomogeneity of the resistance of conducting polypyrrole-coated nylon–Lycra and polyester (PET) fabrics and its effects on surface temperature were investigated through a systematic experimental and numerical work including the optimization of coating conditions to determine the lowest resistivity conductive fabrics and establish a correlation between the fabrication conditions and the efficiency and uniformity of Joule heating in conductive textiles. For this purpose, the effects of plasma pre-treatment and molar concentration analysis of the dopant anthraquinone sulfonic acid (AQSA), oxidant ferric chloride, and monomer pyrrole was carried out to establish the conditions to determine the sample with the lowest electrical resistance for generating heat and model the experiments using the finite element modeling (FEM). Both PET and nylon-Lycra underwent atmospheric plasma treatment to functionalize the fabric surface to improve the binding of the polymer and obtain coatings with reduced resistance. Both fabrics were compared in terms of average electrical resistance for both plasma treated and untreated samples. The plasma treatment induced deep black coatings with lower resistance. Then, heat-generating experiments were conducted on the polypyrrole (PPy) coated fabrics with the lowest resistance using a variable power supply to study the distribution and maximum value of the temperature. The joule heating model was developed to predict the heating of the conductive fabrics via finite element analysis. The model was based on the measured electrical resistance at different zones of the coated fabrics. It was shown that, when the fabric was backed with neoprene insulation, it would heat up quicker and more evenly. The average electrical resistance of the PPy-PET sample used was 190 Ω, and a maximum temperature reading of 43 °C was recorded. The model results exhibited good agreement with thermal camera data.
History
Journal
MaterialsVolume
14Issue
3Article number
550Pagination
1 - 16Publisher
MDPILocation
Basel, SwitzerlandPublisher DOI
Link to full text
ISSN
1996-1944eISSN
1996-1944Language
EnglishPublication classification
C1 Refereed article in a scholarly journalUsage metrics
Categories
No categories selectedKeywords
Licence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC