Enhanced Visible Light Sensitization of N-Doped TiO2 Nanotubes Containing Ti-Oxynitride Species Fabricated via Electrochemical Anodization of Titanium Nitride

The concentration and chemical state of nitrogen represent critical factors to control the band-gap narrowing and the enhancement of visible light harvesting in nitrogen-doped titanium dioxide. In this study, photocatalytic TiO 2 -N nanoporous structures were fabricated by the electrochemical anodization of titanium nitride sputtered films. Doping was straightforwardly obtained by oxidizing as-sputtered titanium nitride films containing N-metal bonds varying from 7.3 to 18.5% in the Ti matrix. Severe morphological variations into the as-anodized substrates were registered at different nitrogen concentrations and studied by small-angle X-ray scattering. Titanium nitride films with minimum N content of 6.2 atom % N led to a quasi-nanotubular geometry, whereas an increase in N concentration up to 23.8 atom % determined an inhomogeneous, polydispersed distribution of nanotube apertures. The chemical state of nitrogen in the TiO 2 matrix was investigated by X-ray photoelectron spectroscopy depth profile analysis and correlated to the photocatalytic performance. The presence of Ti-N and β-Ti substitutional bonds, as well as Ti-oxynitride species was revealed by the analysis of N 1s X-ray photoelectron spectroscopy high-resolution spectra. The minimum N content of 4.1 atom % in the TiO 2 -N corresponded to the lowest Ti-oxynitride ratio of 13.5%. The relative variation of N-metal bonds was correlated to the visible light sensitization, and the highest Ti-N/Ti oxynitride ratio of 3.3 was attributed to the lowest band gap of 2.7 eV and associated with a 3-fold increase in the degradation of organic dye. Further increase of N doping led to a dramatic drop of Ti-N/Ti oxynitride ratio, from 3.3 to 0.4, which resulted in a loss of photocatalytic activity. The impact of the chemical state of nitrogen toward efficient doping of TiO 2 nanotubes is demonstrated with a direct correlation to N loading and a strategy to optimize these factors based on a simple, rapid synthesis from titanium nitride.