Deakin University
Browse

File(s) under permanent embargo

Fabrication of microfluidic devices: Improvement of surface quality of CO2 laser machined poly(methylmethacrylate) polymer

Version 2 2024-06-03, 21:29
Version 1 2016-11-28, 09:36
journal contribution
posted on 2024-06-03, 21:29 authored by MI Mohammed, MNH Zainal Alam, Abbas KouzaniAbbas Kouzani, Ian GibsonIan Gibson
Laser engraving has considerable potential for the rapid and cost effective manufacturing of polymeric microfluidic devices. However, fabricated devices are hindered by relatively large surface roughness in the engraved areas, which can perturb smooth fluidic flow and can damage sensitive biological components. This effect is exacerbated when engraving at depths beyond the laser focal range, limiting the production of large aspect ratio devices such as microbioreactors. This work aims to overcome such manufacturing limitations and to realise more reproducible and defect free microfluidic channels and structures. We present a strategy of multiple engraving passes alongside solvent polymer reflow for shallow depth (<500 μm) and a layer cutting with laminate bonding for larger depth (>500 μm) features. To examine the proposed methodologies, capillary action and bioreactor microfluidic devices were fabricated and evaluated. Results indicate that the multiple engraving technique could reproduce engraved microfluidic channels to depths between 50–470 μm, both rapidly (6–8 min) and with low average surface roughness (1.5–2.5 μm). The layer cutting approach was effective at manufacturing microfluidic devices with depths <500 μm, rapidly (<1 min) and with low surface roughness. Ultimately, the proposed methodology is highly beneficial for the rapid development of polymer-based microfluidic devices.

History

Journal

Journal of Micromechanics and Microengineering

Volume

27

Article number

ARTN 015021

Pagination

1 - 12

Location

Bristol, Eng.

ISSN

0960-1317

eISSN

1361-6439

Language

English

Publication classification

C Journal article, C1 Refereed article in a scholarly journal

Copyright notice

2016, IOP Publishing Ltd

Issue

1

Publisher

IOP PUBLISHING LTD