Deakin University

File(s) under permanent embargo

Mechanically alloyed and spark plasma sintered aluminium/precious metal oxide composite materials

journal contribution
posted on 2010-01-01, 00:00 authored by M Kubota, Pavel CizekPavel Cizek
Air-atomised pure aluminium powder with additions of 10 at.% of AgO, PtO2 or PdO was mechanically alloyed (MAed) by using a vibrational ball mill, and MAed powders were consolidated into bulk materials by a spark plasma sintering (SPS) process. Mechano-chemical reactions among pure Al, precious metal oxide and stearic acid, added as a process control agent, during the mechanical alloying (MA) process and subsequent heat treatments were investigated by X-ray diffraction. The mechanical properties of MAed powders obtained under various heat treatment conditions and those of the SPS materials were evaluated by hardness tests. Mechano-chemical reactions occurred in Al/precious metal oxide composite powders during 36 ks of the MA process to form AlAg2, Pt and Al3Pd2 for the Al-AgO, Al-PtO2 and Al-PdO systems, respectively. Further solid-state reactions in MAed powders have been observed after heating at 373 K to 873 K for 7.2 ks. The hardness of MAed powders initially increased significantly after heating at 373 K and then generally decreased with increasing heating temperatures. The full density was obtained for the SPS materials under the conditions of an applied pressure of 49 MPa at 873 K for 3.6 ks. All the SPS materials exhibited hardness values of over 200 HV in the as-fabricated state.



Materials science forum




1824 - 1829


Trans Tech Publications


Stafa-Zurich, Switzerland





Publication classification

C1 Refereed article in a scholarly journal

Copyright notice

2010, Trans Tech Publications