Strain-insensitive elastic surface electromyographic (sEMG) electrode for ecient recognition of exercise intensities

© 2020 by the authors. Surface electromyography (sEMG) sensors are widely used in the fields of ergonomics, sports science, and medical research. However, current sEMG sensors cannot recognize the various exercise intensities eciently because of the strain interference, low conductivity, and poor skin-conformability of their electrodes. Here, we present a highly conductive, strain-insensitive, and low electrode-skin impedance elastic sEMG electrode, which consists of a three-layered structure (polydimethylsiloxane/galinstan+polydimethylsiloxane/silver-coated nickel+polydimethylsiloxane). The bottom layer of the electrode consists of vertically conductive magnetic particle paths, which are insensitive to stretching strain, collect sEMG charge from human skin, and finally transfer it to processing circuits via an intermediate layer. Our skin-friendly electrode exhibits high conductivity (0.237 and 1.635 mΩcm resistivities in transverse and longitudinal directions, respectively), low electrode-skin impedance (47.23 kΩ at 150 Hz), excellent strain-insensitivity (10% change of electrode-skin impedance within the 0-25% strain range), high fatigue resistance (>1500 cycles), and good conformability with skin. During various exercise intensities, the signal-to-noise ratio (SNR) of our electrode increased by 22.53 dB, which is 206% and 330% more than that of traditional Ag/AgCl and copper electrode, respectively. The ability of our electrode to eciently recognize various exercise intensities confirms its great application potential for the field of sports health.