FIBROLITE

(FIBRO-CEMENT)

Government Loans on easy terms are now obtainable from the Rural Bank of N.S.W. for building "Fibrolite” Homes

fB1

iiuM.nn

J Ij

inSSi.îîl

\mr 1 1 Ihm wMtij 5fnl I iitWMnnl

1 * 11

Sole Manufacturers of "Fibrolite'

JAMES HARDIE & COY. PTY. LTD

York and Barrack Streets, Sydney, N.S.W.

And at Newcastle, Brisbane, Melbourne, Perth, and Auckland, N.Z,

CATALOGUE REFERENCE . . . F.12

EXTRACT FROM LEAFLET ISSUED BY THE RURAL BANK OF N.S.W.

ADVANCES FOR HOMES DEPARTMENT

"12. EXTERNAL WALL COVERINGS:

(a)    ...............................................................

(b)    Weatherboards from base to sill height, then FIBRO-CEMENT above.

All edges of Fibro-Cement to be close and to be supported by studs or rails with cover strips of not less than 3" x Oregon, Redwood, or Fibro-Cement over all joints.

(c)    FIBRO-CEMENT THROUGHOUT, with cover strips as in (b). All external Fibro-Cement Sheets at horizontal joints to be flashed with 2-lb. lead. (Galvanised iron subject to approval.)

"13. INTERNAL WALL COVERING:

(a) .........................,..........-...................----- -.................................—

(b)    FIBRO-CEMENT.

(d)    zzziz zizzz :    .......~.~

"14. ROOF COVERING:

Slates, Tiles, or Iron.

(a) If Fibro-Cement slates are used, roofing felt must be placed on top of battens and under slates where the roof pitch is not less than 35 degrees and slates must have a A" lap.”

NOTE: "FIBROLITE” is the name adapted for our Australian Manufactured Asbestos-Cement Sheets, which material, prior to the war, was imported from England and sold by us under the name of FIBRO-CEMENT

JAMES HARDIE & COY. PTY. LTD.

fai oqqif fardä


Ht



BUILD FOR

Permanence—Fire Safety and Economy

Use Hardie’s Genuine

I’lbrollfd

ASBESTOS CEMENT SHEETS

(FIBRO-CEMENT)



Roof with "Fibrolite” Tiles or Corrugated Sheets.


MADE IN N.S.W.


Sole Manufacturers:

JAMES HARDIE & COY. PTY. LTD.

"Asbestos House”

Cnr. York and Barrack Streets, Sydney, N.S.W.

Box 3935V, G.P.O. :: Telephone B7721 (6 lines)

334 Hunter Street, Newcastle West And at Melbourne, Brisbane, Perth, and Auckland, N.Z.

(1st JULY, 1937)


CATALOGUE REFERENCE


F.12


What “Fibrolite” is . ..


“T~' IBROLITE ” is a Strong, Durable and Fire [7 Retardant material, manufactured solely from Australian Portland Cement and Asbestos Fibre into various classes of building materials.

"FIBROLITE” is made on a laminated process, being built up, layer upon layer, like the leaves of a book. Each of these layers are strongly and rigidly reinforced throughout with the long, indestructible Asbestos Fibre, and are finally united into one homogeneous, rock-like mass—forming a dense sheet of great tensile strength and durability.

Sizes, Thicknesses and Weights

HARDIE’S "FIBROLITE” FLAT SHEETS

"FIBROLITE” Flat Sheets are obtainable in the following stock sizes and thicknesses:—

For External Walls, Gables, etc. No. 5 Sheets, &in. Thick.

For Internal Walls and Ceilings, etc. No. 4 Sheets, ÿ\zin. Thick.

4ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12ft. long. 3ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12ft. long. 2ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long.

1ft. 6in. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long.

1ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long.

4ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long. 3ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long. 2ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long. 1ft. 6in. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long. 1ft. Wide:

x 3, 4, 5, 6, 7, 8, 9, and 10ft. long.

NOTE.—Owing to the large variety of sizes in which "Fibrolite” Asbestos-Cement Sheets are manufactured, the material can be erected with practically no waste. This is an advantage obtained by specifying Hardie’s Genuine "Fibrolite.”

THICK SHEETS: "FIBROLITE” Sheets up to | inch thick made in any of the above sizes to order.

WEIGHTS:

Approximate Number of Square Yards to One Ton

"FIBROLITE” Flat Sheets, No. 5........

"FIBROLITE” Flat Sheets, No. 4........

Uncrated

Crated

130 square yards 160 square yards

110 square yards 140 square yards

"FIBROLITE” TILES:

Made in colours: Russet, Red, Blue-Black, and Grey.

Sizes

Approx. Number of Tiles to One Ton

Uncrated

Crated

16in. x 16in. for Diagonal Fixing........

850

750

*20in. x lOin. for Rectangular Fixing ......

1,000

900

16in. x 8in. for Rectangular Fixing ......

1,650

1,450

* Not available in Red.

WHEN YOU BUILD - -

Specify and Insist on . . .

HARDIES GENUINE 'FIBROLITE''

THE SUPER-REINFORCED ASBESTOS CEMENT SHEETS

UNRIVALLED FOR QUALITY, STRENGTH, AND PERFECT FINISH FOR OVER 20 YEARS

“FIBROLITE” MOULDINGS

For covering joints and edges of Hardie’s "Fibrolite” Asbestos Cement Sheets on External and Internal Walls and Ceilings. LENGTHS: 6ft., 7ft., 8ft., 9ft., 10ft., lift., 12ft.

Order by Art. Number.

"FIBROLITE” HORIZONTAL MOULDINGS

COLOUR: Grey. Also supplied in Russet at increased cost.




For horizontal panelling of walls covered entirely with "Fibrolite” Sheets.


For horizontal panelling of walls    For horizontal panelling of walls

covered entirely with "Fibrolite”    covered with "Fibrolite,” with

Sheets.    weatherboards to sill height.

"FIBROLITE” CORNER PIECES, for internal or external angles, are supplied for use in conjunction with above mouldings.

"FIBROLITE” COVER MOULDING


"FIBROLITE” ANGLE MOULDING



ART. 8A ART. 8B ART. 9A ART. 9B



ART. 8: With round edges.

ART. 9: With square edges.

Used for—

(1)    Vertical panelling of external walls.

(2)    Vertical and horizontal panelling of internal walls.

(3)    Panelling ceilings.

Sizes: lfin., 2in., 2iin., 3in.


Supplied with round or square edges, for covering internal or external angles, as ordered.

Round edges for external angles. Round edges for internal angles. Square edges for external angles. Square edges for internal angles. Sizes: liin. x liin., 2in. x 2in., 2fin. x 2!in., 3in. x 3in.


"FIBROLITE” CORNICE MOULDING



"FIBROLITE” PICTURE RAIL MOULDING


Gives a neat and uniform appearance to walls panelled with "Fibrolite” Sheets.

"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 128

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.


"CT-’IBROLITE” builds better

HOMES: By using Hardie’s J Genuine "FIBROLITE” Asbestos Cement Sheets for External and Internal Walls and Ceilings and "FIBROLITE” Tiles for Roofing, you will be assured of a modern, attractive and durable home—at the minimum of cost.

You will also have the satisfaction of knowing that your home will be fire retardant . . . permanently durable . . . unharmed by the ravages of time . . . cool in summer . . . warm in winter.

What more could you desire of the home you have planned?

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.



JAMES HARDIE 8C COY. PTY. LIMITED


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 102

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.

“CT-IB H FI

«y sic



IBROLITE” ENSURES LOW FIRST COST: What a big consideration this is. It means that a "FIBROLITE” home will cost you less than any other type of permanent dwelling you can erect . . . built, of course, to same size and design.

It means, also, that if you are obtaining a loan with which to build your home, the low capital cost of a "FIBROLITE” dwelling will not involve heavy interest charges. You will thus be able to pay off both principal and interest in a comparatively few years instead of having to meet the heavy burden of high interest charges inevitable with more costly types of homes.


NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 129

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.



IBROLITE” ENSURES LOW UPKEEP COSTS: It is a fact that many thousands of homeowners in Australia are confronted every two or three years with the problem of meeting heavy maintenance costs for painting, renovations and repairs to their homes.

You can banish this worry, trouble and expense by using Hardie’s "FIBROLITE” Asbestos Cement Sheets for the external and internal walls and ceilings of your home. "FIBROLITE” does not require the protection of costly oil paint. It is weatherproof and contains nothing to rot, rust or decay. IT IMPROVES WITH AGE!


NOTE: If you like this design, submit it to your Architect and he udll (prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 103

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.



IBROLITE” ELIMINATES WASTE: As Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets are obtainable in 44 handy stock sizes (see page 3), waste can be entirely eliminated where this economical building material is used.

Ensure that waste will be reduced to a minimum in the construction of your new home by specifying Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls, ceilings, gable-ends, eaves-soffits, etc.



NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES

"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 104

Showing horizontal panel treatment of wails with "Fibrolite” Horizontal Moulding.


/^UICK CONSTRUCTION — ly LESS LABOUR: The amount of labour required in the construction of your new home will naturally have a big bearing on its total erected cost. This is just one reason why you will save money by building with Hardie’s Genuine "FIBROLITE.”

"FIBROLITE” enables dwellings to be erected easily, quickly and at a minimum cost for labour. Supplied in big, sturdy building sheets in a large range of handy stock sizes, it is easily and quickly erected—with considerably less labour than is necessary with most building materials. This big saving in labour materially reduces the cost of the building.

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.




"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 130

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.


C\ f*0 PAINTING; As it is not J V necessary to paint "FIBRO-\«LITE” to protect it against the elements, this item of expense can be eliminated where this durable building material is used for external walls. Left unpainted in its natural colour of pleasing grey, "FIBROLITE” gives an artistic appearance to any dwelling.

If painting is desired for decorative purposes, all that is necessary is an application of Hardie’s "FIBRO-C” Cold Water Paint, which costs about 50 per cent, less than oil paint. Think what this saving alone means to you—both in initial cost and maintenance.

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for yon. Be sure, however, to specify Hardie’s Genuine FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.



"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 127

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.


/S ow INSURANCE: Insur-J. ance Companies, recognising the unique fire-retardant qualities of "FIBROLITE,” allow a reduction of 25 per cent, in rates for dwellings or other types of buildings where Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets are used for walls, ceilings, etc., in place of materials that are non-resistant to fire.

yearly saving

SPECIFY AND INSIST ON HARDIE’S GENUINE "FIBROLITE.” TRIED, TESTED AND PROVED FOR OVER 20 YEARS.




"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 108

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.



HARDIE’S GENUINE "FIBROLITE.” PROVED FOR OVER 20 YEARS.


m


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 132

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding.


P OW FREIGHT COSTS: "FIBROSA LITE” is carried by the N.S.W.

^ Government Railways Department at favourable rates of freight, enabling "FIBROLITE” dwellings to be erected in the country districts for very little extra over and above the cost in the near suburbs of Sydney.

"FIBROLITE” is light in weight—one ton of sheets ^in. thick will cover a wall or ceiling area of approximately 1,440 square feet.

Hardie’s Genuine "FIBROLITE” is stocked by leading Storekeepers and Timber Merchants throughout Australia and New Zealand.



NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 114

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding




SPECIFY AND INSIST ON HARDIE’S GENUINE "FIBROLITE.” TRIED, TESTED AND PROVED FOR OVER 20 YEARS.


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 105

Showing horizontal panel treatment of walls with "Fibrolite” Horizontal Moulding

Cl\ /T INIMISES FIRE RISKS :


yj_ Made solely from Asbestos Fibre and Portland Cement, "FIBROLITE” is a Fire Retardant building material—thus, when used for external and internal walls and ceilings, it reduces the fire hazard to a minimum. This factor of fire safety is one of paramount importance, especially for country dwellings.

Keep in mind, too, that "FIBROLITE” will enable you to build a fire retardant dwelling at a lower cost than can be obtained by the use of any other building material.

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.




“Fibrolite” Ensures Artistic Walls and Ceilings

BY using Hardie’s "FIBROLITE” Asbestos-Cement Sheets for lining the internal walls and ceilings of your new home, you can plan to have a distinctive and appropriate treatment for every room.

"FIBROLITE” lends itself to every interior decorative treatment. Any desired panel effect, no matter how simple or elaborate it may be, can be obtained and the most delicate colour schemes carried out ... at the minimum of cost.

The above illustration shows but one of the many artistic treatments obtained with walls and ceilings panelled with "FIBROLITE.” If a picture rail is desired, sheets 6ft., 7ft. or 8ft. long are used for the panels on the lower portion of the walls, with sheets 2ft., 3ft., or 4ft. wide above forming the frieze. Wall-paper may also be used, either panelled or with the cover mouldings eliminated to give a plain wall surface.



No matter what type of dwelling you decide to build—you can use "FIBROLITE” Asbestos-Cement Sheets for lining its internal walls and ceilings, or for the latter only. You will thus give your home the advantages of a wall and ceiling material that is always artistic, fire retardant, proof against white ants and borers and impervious to dampness!

Use “Tilux” for your Bathroom and Kitchen Walls

THE problem of “high cost” need not deter you from giving your new home the added comfort and charm of a modern and artistic bathroom and kitchen. By using “TILUX” for panelling these rooms, you can give them all the advantages of tiled walls—at a mere fraction of the cost.

'TILUX” is a “marble-finished” Asbestos-Cement wall panel and is obtainable in eight



beautiful colours or patterns and in a variety of stock sizes. It has a smooth, highly-glazed surface that provides all the luxury and hygienic cleanliness of marble. It is Fire Retardant and Waterproof—Hygienic and Easy to Clean . . . soap and water keeps it spotless; always artistic and immaculate.

“TILUX” not only costs considerably less than tiles, but is fixed in a fraction of the time, at a fraction of the cost, and can be applied to practically any wall base. It is especially suitable for buildings of the frame type, as it is easily and quickly fixed to the wall studs. Any carpenter can erect "TILUX.”

Illustrated pamphlet containing coloured illustrations of patterns, sizes, directions for use, etc., supplied on request.


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 112

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.




GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES



"FIBROLITE” (Fibro-Cemem) DWELLING DESIGN No. 106

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


rHITE ANT AND BORER PROOF: One of the important advantages you will obtain by using Hardie’s "FIBROLITE” Asbestos-Cement Sheets for the external and internal walls and ceilings of your new home is that this durable building material is proof against the ravages of white ants and borers.

"FIBROLITE” is also proof against rodents and offers no crevices or lodging places to harbour germs or vermin, thus ensuring the most hygienic conditions.

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.




"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 110

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.




SPECIFY AND INSIST ON HARDIE’S GENUINE "FIBROLITE.” TRIED, TESTED AND PROVED FOR OVER 20 YEARS.


JAMES HARDIE & COY. PTY. LIMITED


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 115

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


C'TJROOF AGAINST ROT, RUST JL AND CORROSION: Unlike fibrous plaster sheets, paper-pulp wallboards and many other lining materials, Hardie’s Genuine "FIBROLITE” contains absolutely no vegetable matter to rot or corrode. It is for this reason "FIBROLITE” is unaffected by conditions of dampness so ruinous to walls and ceilings lined with plaster, paper pulp, and metal lining materials.

GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES.


NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 116

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.





INSIST ON HARDIE’S


GENUINE "FIBROLITE.”



"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 117

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


1


TMPROVES WITH AGE: It is a

well-known fact that most building materials deteriorate with age, being affected by rot, rust, corrosion or other destructive agencies.

Not so with "FIBROLITE.”

Composed solely of indestructible Asbestos Fibre and Portland Cement, this permanent building material constantly IMPROVES WITH AGEgrowing harder, stronger, tougher and more durable with the passing of time. Years of exposure to weather . . . summer heat . . . winter cold . . . rain . . . or even sea-air, have not the slightest effect upon its durability. By building with "FIBROLITE,” you build for PERMANENCE.

INSIST ON HARDIE’S GENUINE "FIBROLITE.”




"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 118

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.

foi.cn

s' xi»E vy f—i

___

b t 0 LOOM "

I2‘ X I2‘ .

A_

Unity

07v-7‘

>r| K.ITCU l N j-l ir < ir

^ A

uïinq t

X

r;'

.ooM v| r

t H •

»M« 1

< 11 .—ils

>

L t 0 (LOOM l5'G"x 15’-

: W

Vee-andar y wist•

--\J)

¿>4 ic".

No. 118B




NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 107

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


“CT~* IBROLITE” EXTERNAL I' WALLS: From viewpoints of *•'' artistic appearance, fire safety, durability and economy, the most satisfactory method of treating the external walls of "FIBROLITE” dwellings is that of covering the entire area of the walls with "FIBROLITE” Asbestos-Cement Sheets and panelling same with "FIBROLITE” Horizontal Mouldings or Cover Mouldings (see page 4). If a more definite contrast in the panel treatment is preferred, wood cover battens may be used and stained or painted in any desired tone.


NOTE: If you like this design, submit it to your Architect and he will ¡¡repare complete plans and specifications for you. Be sure, however, to specify Hardie’s Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

GOVERNMENT LOANS, ON EASY TER MS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES




25'O"

No. 120 A


INSIST ON HARDIE’S



GENUINE "FIBROLITE.”



"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 121

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


TT ALF - TIMBERED EFFECTS :

/ 7 Another method of treating the external walls of "FIBROLITE” dwellings is that of using rusticated weatherboards to window sill height, with "FIBROLITE” Sheets above, as shown by Design No. 121. This treatment can be used for any of the cottages illustrated in this booklet.

Many picturesque effects are to be obtained with this half-timbered treatment and for this reason it is very popular.

NOTE: If you like this design, submit it to your Architect and he will prepare complete plans and specifications for you.

GOVERNMENT LOANS, ON EASY TERMS, ARE OBTAINABLE FROM THE RURAL BANK OF N.S.W. FOR BUILDING "FIBROLITE” HOMES



JAMES HARDIE 8c COY. PTY. LIMITED


"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 122

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.





SPECIFY AND INSIST ON HARDIE’S GENUINE "FIBROLITE.” TRIED, TESTED AND PROVED FOR OVER 20 YEARS.



"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 123

Cover Moulding.


Showing vertical panel treatment of walls with "Fibrolite”



EAUTIFY YOUR HOME WITH A "FIBROLITE” TILE ROOF:

Think of the added charm and beauty one of these colourful roofs will give to your new home!

Fixed rectangularly in the same manner as natural slates and being mottled in pleasing tones, varying from a light golden russet to a deep brick-red, ' FIBROLITE” Russet Tiles give a neat and charming appearance to any type of dwelling.

"FIBROLITE” Tiles are also available in colours Red, Blue-Black and Grey, in sizes for fixing rectangularly or diagonally. (See page 3.)


NOTE: If yon like this design, submit ii to your Architect and he will prepare complete plans and specifications for you. Be surehowever, to specify Hardiey$ Genuine "FIBROLITE” Asbestos-Cement Sheets for external and internal walls and ceilings and "FIBROLITE” Tiles for roofing.

m


"FIBROLITE” (Fibro-Cemem) DWELLING DESIGN No. 124

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.



VtafcNDilH 7'

J'VO

- LAUNDR.Y


--.LAUNDR.Y

I^.ITCUCN    to' » 7'


12' «. Il'


ÊtoaooM 12' * <3'


Living Hoom 17’ «. 13’



Tv/——1


t HTB.XNCI POR.CH


t V

6EDI.OOM    ÌED200M

121 * II'    )2' «. 12'<ô”


"W-

V E. R.IWOIK 7’ Hitt


U_SO', o’.’


No. 124B



"FIBROLITE” (Fibro-Cement) DWELLING DESIGN No. 125

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


/NSIST ON HARDIE’S GENUINE "FIBROLITE.”

"FIBROLITE” is manufactured by the exclusive HARDIE Process, which ensures sheets of maximum strength and dura-0    bility and a uniformly high

standard of quality.

>0


It is important, therefore, to clearly stipulate HARDIE’S GENUINE "FIBROLITE” Asbestos-Cement Sheets when specifying the materials for external and internal walls, ceilings, partitions, gable-ends, eaves-linines, etc.

NOTE: If you like the above design, submit it to your Architect and he will prepare complete plans and specifications for you.


"FIBROLITE” (Fibro-Cemem) DWELLING DESIGN No. 126

Showing vertical panel treatment of walls with "Fibrolite” Cover Moulding.


l-


-I


No. 126 A


No. 126B


Note . . .


do not build “FIBRO-


LITE” Homes or undertake any building construction work.

Any builder in your district will give you an estimate for a “FIBROLITE” Home — built


to your plans and specification.

JAMES HARDIE & COY. PTY. LTD.


Nbroliré

ASBESTOS-CEMENT ' PRODUCTS •

For Walls, Ceilings, etc.:

"FIBROLITE” Asbestos-Cement Flat Sheets "FIBROLITE” Covet and Angle Mouldings "FIBROLITE” Eaves Mouldings "FIBROLITE” Ventilators "TILUX” Marble-finished Wall Panels "VELOTILE” Wall Panels "LUMEX” Metal Mouldings

For Roofing:

"FIBROLITE” Asbestos-Cement Tiles "FIBROLITE” Corrugated Sheets "FIBROLITE” Guttering and Downpipes "FIBROLITE” Ridge Cappings "FIBROLITE” Skylights "FIBROLITE” Roof Ventilators "TUSKAN” Tiles

Miscellaneous:

"FIBROLITE” Louvre Blades "FIBROLITE” Barge Mouldings "FIBROLITE” Gas Flue Pipes "FIBROLITE” High-pressure Water Pipes "FIBROLITE” Conduits for Electric Mains "FIBROLITE” Electrical Sundries "VELOBLAC” School Blackboards

JAMES HARDIE & COY. Pty. Ltd.

Sydney, Newcastle, Brisbane, Melbourne, Perth, and Auckland, N.Z.


6M—1/12/37


Wholly set up and printed in Australia by Waite & Bull, 486 Elizabeth Street, Sydney.